Back to AION420
AION420 · Sensor wiring
2-wire or 3-wire – which connection fits?
4–20 mA sensors come as 2-wire and 3-wire versions. The AION420 supports both – what matters is how your sensor is powered.
At a glance
- 2-wire
- Supply and signal on one pair
- 3-wire
- Own supply, separate signal wire
- Ground
- Common reference for 3-wire
+24 VAION420
SignalAION420
2-wire (loop-powered)
The sensor draws its energy from the current loop. Two conductors are enough – typical for pressure and level transmitters.
+24 VAION420
SignalAION420
0 VAION420
3-wire
The sensor has its own positive supply and the signal runs on a third wire. Common for devices with higher own consumption.
How to proceed
- 1.Check the sensor's rating plate or datasheet
- 2.Count the connection wires
- 3.Choose the matching terminal assignment on the AION420
- 4.Verify the reading via BLE after connecting
Rule of thumb: if the datasheet says “loop powered”, it is a 2-wire sensor.