← Back to overview
LoRaWAN® knowledge

What is LoRaWAN®?
Wireless technology for distributed IoT sensors

LoRaWAN is an open network standard for small data packets over long distances. It connects energy-efficient sensors with gateways, network servers and applications – especially where data cables are too costly or impractical.

Technical deep dive
kmRange over data rate
YearsBattery life possible
AES-128Key-based security
EU868Licence-free band in Europe
01

LoRa, LoRaWAN and LPWAN

LPWAN is the family of energy-efficient wide-area networks. LoRa is the Semtech-developed radio modulation at the physical layer. LoRaWAN adds the protocol, network architecture, device classes and security mechanisms. In short: LoRa carries the radio signal; LoRaWAN organizes the network.

02

How does LoRaWAN work?

An end device sends a reading as a compact uplink. One or more gateways receive it and forward it over the internet to the network server. The server removes duplicates, manages devices and radio parameters, and hands payloads to the application server. The application turns them into charts, alerts or interface values.

03

Star-of-stars, not a radio chain

Sensors transmit directly to every gateway in range; they do not relay messages for one another. Several gateways may hear the same uplink. The network server selects the usable copy. This improves coverage and avoids a single radio route becoming a bottleneck.

04

What LoRaWAN can – and cannot – do

LoRaWAN excels at periodic or event-driven readings, long links and many distributed devices. It is not real-time technology: machine control, safety shutdowns, video, audio and continuous data streams do not belong on LoRaWAN. Long range and low energy use are deliberately traded for a low data rate.

05

Security and activation

With OTAA, a device joins the network through an activation process. Unique device identifiers and separate network and application keys protect transport and payload. LoRaWAN uses AES-128-based mechanisms. Secure key management, current firmware and controlled interfaces still remain the operator's responsibility.

Network architecture

From sensor to customer application

Four layers cleanly separate radio reception, network management and data use.

  1. End device

    Sensor

    Measures and sends small uplinks.

  2. Radio bridge

    Gateway

    Receives LoRa and forwards over IP.

  3. Network layer

    Network server

    Validates, deduplicates and manages the network.

  4. Application layer

    Application

    Visualizes, alerts and integrates data.

Why organizations use LoRaWAN

01

Long range

Several kilometres are realistic depending on terrain, buildings, antennas and radio planning.

02

Low energy

End devices sleep between transmissions, enabling years of battery-powered operation.

03

Lean infrastructure

One gateway can cover many measuring points; end devices need no SIM card.

04

Scalable retrofit

Tanks, meters and machines can join monitoring without new data cables.

05

Bidirectional

Downlinks enable settings and commands within radio and duty-cycle limits.

06

Open ecosystem

Private, public and hybrid networks with different servers and platforms are possible.

Device classes

Balance energy and reachability

ClassReceptionEnergy useTypical use
Class AAfter own uplinkVery lowBattery sensors
Class BAdditional time slotsMediumScheduled downlinks
Class CAlmost continuousHighMains-powered actuators
Technology comparison

LoRaWAN, mioty and cellular LPWAN

TechnologyInfrastructureStrengthConsider
LoRaWAN®Private, public or hybridOpen ecosystem, flexible networksNot real time, low data rate
mioty®Owned or managed infrastructureTelegram Splitting, high robustnessSmaller ecosystem
NB-IoTCellular network and SIM/eSIMOperator coverage, deep indoor reachTariff and provider dependency
LTE-MCellular network and SIM/eSIMHigher data rate and mobilityMore energy than typical LPWAN sensing

Typical LoRaWAN applications

  • Level in tanks, silos and containers
  • Water, heat and electricity meters
  • Temperature and air quality
  • Water levels and environmental stations
  • Waste containers and parking
  • Retrofit condition monitoring
Frequently asked questions
How far does LoRaWAN reach?+

Range depends on terrain, buildings, antenna height and radio planning. Several kilometres are common; favourable rural conditions can deliver substantially more.

Do I need my own gateway?+

Only if no suitable public or managed network covers the site, or if you deliberately want a private network.

Is LoRaWAN free?+

Licence-free spectrum can be used without a mobile licence. Hardware, operation, servers or a network service may still cost money.

How long does the battery last?+

Depending on interval, sensor, radio quality and battery, multi-year operation is possible. A fixed number is not credible without a load profile.

Is LoRaWAN secure?+

LoRaWAN uses AES-128-based keys and separate security contexts. Sound key management and secure applications remain essential.

Does LoRaWAN work inside buildings?+

Often yes. Walls, metal, basements and gateway placement influence radio quality; a site survey provides certainty.

How many sensors are possible?+

A large number, provided intervals, packet sizes, radio planning and regulatory airtime limits are designed together.

Does a sensor need a SIM card?+

No. LoRaWAN end devices communicate with gateways by LoRa radio and need no cellular SIM.

Can LoRaWAN deliver real time?+

No. It is not designed for millisecond reactions, closed control loops or continuous streaming.

When is LoRaWAN the right choice?+

When small data volumes travel periodically or on events over long distances and energy, cabling or operating cost matter.

Next step

Send IO-Link sensor data over LoRaWAN

AION LIO connects industrial IO-Link sensors directly to the radio network – without another IO-Link master in the control cabinet.