Back to overview
Technology in detail

AION LIO: IO-Link master with LoRaWAN interface

AION LIO connects two worlds: established industrial sensing and wireless wide-area technology. This page explains how an IO-Link master works, what LoRaWAN delivers and how the two come together in the adapter.

How does an IO-Link master work?

The master is the sensor's counterpart: it supplies the device with 24 V DC, negotiates the communication parameters and reads the process data cyclically. Classically, the master sits in an I/O module in the control cabinet and forwards the data to a controller via fieldbus. AION LIO collapses this principle: the master sits directly in the adapter at the sensor – the control cabinet disappears.

What is LoRaWAN?

LoRaWAN® is a radio protocol for long distances at minimal power: kilometer-range coverage, years of battery life, encrypted transmission and an open ecosystem of network servers and gateways. It is built for small, periodic data packets – readings, states, alarms – not for real time or streams. Exactly the profile industrial sensing needs.

System architecture

From the IO-Link sensor to the target system

AION LIO sits directly at the sensor and connects its digital process data to a LoRaWAN network – without an additional data cable to the control cabinet.

  1. 01
    Field level

    IO-Link sensor

    Provides process value, device status, diagnostics and parameters as digital data.

  2. 02
    Master & converter

    AION LIO

    Powers the sensor, reads its data and translates it using the IODD.

  3. 03
    Radio link

    LoRaWAN®

    Transmits compact uplinks over long distances to the nearest gateway.

  4. 04
    Data usage

    Platform & cloud

    Makes values available for dashboards, alerts, APIs or your own evaluation.

Suitable use cases

Useful where data cabling becomes difficult

The sensor delivers its process data as raw bytes. AION LIO reads the matching IODD – the device's XML description file – and interprets names, data types, units and value ranges from it. That turns 01 82 00 3C into a distance of 386 mm with an active switching output. The interpreted values travel as a compact uplink via LoRaWAN® to the network server, the cloud or your own evaluation. The adapter is configured conveniently via BLE.

  • Distributed tanks & IBCs
  • Outdoor plants
  • Retrofit without PLC changes
  • Mobile measuring points
  • Condition monitoring
  • Temporary monitoring
Which applications does this make sense for?

Wherever measuring points are widely distributed, hard to wire or need to be added retroactively: level in tanks and IBCs, pressure and flow monitoring in outdoor plants, condition monitoring on machines without a PLC connection, mobile or temporary measuring points. The existing automation stays untouched – the data simply comes out wirelessly in addition.

Alternatives in the same ecosystem

And if IO-Link does not fit?

For analog sensors there is the AION420 with a 4–20 mA input, and if you prefer mioty® over LoRaWAN®, there is a variant for that too. The data paths stay equally simple: connect the sensor, receive the values.