Back to overview
Fundamentals

The IO-Link sensor: standard, vendors, applications

IO-Link is the open point-to-point standard for the last meters to the sensor. This page explains what is behind it, who offers the technology and where it is used.

What is IO-Link?

IO-Link (IEC 61131-9) is a standardized point-to-point interface between sensor and master. Process data, parameters and diagnostics all travel over the same unshielded standard cable – digital instead of analog. The sensor delivers not just a reading but also its type, serial number, condition and settings. Replacing a sensor becomes a formality: the master automatically pushes the stored configuration to the new device.

Which vendors are there?

IO-Link is not a proprietary system but an open standard of the IO-Link Community within the PROFIBUS Nutzerorganisation (PI), with more than 500 member companies. Sensors and masters come from ifm, Balluff, SICK, Baumer, Pepperl+Fuchs, TURCK, Siemens, Festo, Endress+Hauser, OMRON, Beckhoff and Phoenix Contact, among others. More than 30,000 IO-Link products are available on the market – the selection is an offering, not a compatibility guarantee in individual cases.

From reading to radio network

How a sensor becomes a connected data point

IO-Link defines the digital connection to the sensor. LoRaWAN then handles energy-efficient transport over long distances.

  1. 01
    Measured variable

    IO-Link sensor

    Captures level, pressure, flow, distance or machine condition.

  2. 02
    Digital connection

    IO-Link

    Transfers the reading, diagnostics and parameters over one standard cable.

  3. 03
    Master & translator

    AION LIO

    Reads the device, interprets the IODD and creates the radio payload.

  4. 04
    Wide-area radio

    LoRaWAN®

    Carries small, periodic data packets to the gateway and target system.

Typical measurement tasks

One standard, many sensor worlds

Practically every classic measurement task in factory and process automation: level and limit level in tanks, pressure in lines, media flow, temperature, position and distance, vibration and machine condition, plus identification. Add smart switching and lighting applications. The strength of the standard: a sensor type can be reconfigured via parameters instead of being mechanically rebuilt.

  • Level & limit level
  • Pressure & flow
  • Temperature & humidity
  • Position & distance
  • Vibration & condition
  • Identification
How is the market?

IO-Link has been growing at double-digit rates for years. By the end of 2025, around 71 million nodes (devices and master ports) were installed worldwide, with 9.7 million added in 2025 alone. Growth is driven by retrofit projects, predictive maintenance and the desire to make sensor data available above the control level – without touching the running automation.

The bridge into the LoRaWAN network

And how does the data reach the internet?

This is exactly where AION LIO comes in: the adapter is itself the IO-Link master and forwards the process data wirelessly via LoRaWAN® – no PLC, no fieldbus, no data cable. More on the AION LIO page.