← Back to benefits
Benefit 02 · Investment costs

Digitisation that starts at the sensor – not in the automation budget

Classic IO-Link integration needs a master, fieldbus connection, PLC programming and installation. AION LIO combines the IO-Link master and the LoRaWAN® interface in one adapter – the expensive items disappear.

no separate IO-Link master−Master
no input card, no programming−PLC
no cable installation−Install
AION LIO

Where the money usually goes

In retrofits the sensor is often the smallest item. Most of the cost is master hardware, fieldbus modules, engineering hours, cables and installation – for every single point.

Hardware

IO-Link master and radio module in one device.

Engineering

Automatic IODD parsing instead of manual data mapping.

Installation

Mounting at the sensor, no electrical project.

Operation

Open interfaces (MQTT, webhook, REST), no proprietary lock-in.

How it works
▲

Start small

One sensor, one adapter, one gateway: a pilot without a big project.

▲▲

Prove the value

Readings quickly show where monitoring pays off.

▲▲▲

Scale

Add more points step by step – without a new base investment.

Comparison

IO-Link Wireless or IO-Link over LoRaWAN®?

IO-Link Wireless is a separate standard of the IO-Link Community for wireless communication inside a machine or cell. AION LIO instead uses wired IO-Link at the sensor and LoRaWAN® for the link to the application. They solve different tasks.

IO-Link WirelessAION LIO + LoRaWAN®
Radio2.4 GHz, for the factory floorSub-GHz (868 MHz in the EU)
RangeMachine and cell level, typically a few metresHundreds of metres to kilometres
TimingNear real-time, millisecond cyclesPeriodic, minute or event based
SensorsDedicated IO-Link Wireless devices or bridgesExisting wired IO-Link sensors
InfrastructureWireless master at the machine, PLC integrationLoRaWAN® gateway and network server, no PLC needed
Typical useRotating parts, tool changers, roboticsDistributed points, tanks, legacy plants, outdoor sites

Rule of thumb: if you need fast control data inside the machine, IO-Link Wireless fits. If you want distributed sensor values in your monitoring without cables or PLC changes, AION LIO with LoRaWAN® is the simpler solution.

IO-Link + LoRaWAN®

Two standards, one adapter

01

IO-Link

The vendor-independent standard for smart sensors (IEC 61131-9). Process values, parameters and diagnostics arrive digitally, described by an IODD – from thousands of sensors by many manufacturers.

02

LoRaWAN®

The open radio network for the industrial IoT: kilometre range, through walls and across sites, private or public networks, standardised forwarding to your application.

AION LIO is the IO-Link master that connects both: plug in the sensor, the IODD is parsed, readings go out over LoRaWAN®.

FAQ
How much will I save?

It depends on cable runs, plant and engineering effort. We are happy to work through your use case with you.

Do I need my own LoRaWAN® network?

No. Use your own gateway, an existing network or the Sentinum Cloud with built-in network server.