Benefit 03 · Easy digitisation

From sensor to data point in three steps

No PLC programming, no fieldbus engineering: AION LIO reads the IO-Link sensor, IODD parsing turns raw data into readable values, LoRaWAN® delivers them to your platform.

3
steps to the reading
IODD
parsed automatically
0
lines of PLC code
How it works
  1. 1

    Mount the adapter

    Plug AION LIO onto the IO-Link sensor and supply 24 V DC.

  2. 2

    Provide the IODD

    The manufacturer's device description is parsed – process data get names and units.

  3. 3

    Use the data

    Over LoRaWAN® to the network server, then via MQTT, webhook or REST into your application.

Why digitisation often stalls

Many sensors already deliver valuable data – it just never reaches anyone who analyses it. The route through automation needs approvals, engineering and specialists.

0x01 0x2C 0x00 0x7F  →  IODD  →  { "pressure": 3.0, "unit": "bar" }
Vendor-independent

Any IO-Link sensor with an IODD, e.g. ifm, SICK, Balluff or Pepperl+Fuchs.

Readable values

bar, °C, % or mm/s instead of hex bytes.

BLE configuration

On-site settings without a laptop cable.

Automation untouched

No changes to existing controllers and approvals.

IO-Link + LoRaWAN®

Two standards, one adapter

01

IO-Link

The vendor-independent standard for smart sensors (IEC 61131-9). Process values, parameters and diagnostics arrive digitally, described by an IODD – from thousands of sensors by many manufacturers.

02

LoRaWAN®

The open radio network for the industrial IoT: kilometre range, through walls and across sites, private or public networks, standardised forwarding to your application.

AION LIO is the IO-Link master that connects both: plug in the sensor, the IODD is parsed, readings go out over LoRaWAN®.

Comparison

IO-Link Wireless or IO-Link over LoRaWAN®?

IO-Link Wireless is a separate standard of the IO-Link Community for wireless communication inside a machine or cell. AION LIO instead uses wired IO-Link at the sensor and LoRaWAN® for the link to the application. They solve different tasks.

IO-Link WirelessAION LIO + LoRaWAN®
Radio2.4 GHz, for the factory floorSub-GHz (868 MHz in the EU)
RangeMachine and cell level, typically a few metresHundreds of metres to kilometres
TimingNear real-time, millisecond cyclesPeriodic, minute or event based
SensorsDedicated IO-Link Wireless devices or bridgesExisting wired IO-Link sensors
InfrastructureWireless master at the machine, PLC integrationLoRaWAN® gateway and network server, no PLC needed
Typical useRotating parts, tool changers, roboticsDistributed points, tanks, legacy plants, outdoor sites

Rule of thumb: if you need fast control data inside the machine, IO-Link Wireless fits. If you want distributed sensor values in your monitoring without cables or PLC changes, AION LIO with LoRaWAN® is the simpler solution.

FAQ
What is an IODD?

The IO Device Description defines which data an IO-Link sensor provides. The manufacturer supplies it.

Do I need to program?

No. IODD parsing handles decoding; you receive structured readings.