← Back to applications
Application · Flow

Connect flow and media temperature in pipes

Capture flow-related values where they originate and make them usable for consumption transparency and deviation detection via IO-Link and LoRaWAN®.

Flow sensor in an industrial pipe
Line 01

Cooling circuit

Flow

Verify supply

Line 02

Lubrication

Trend

See deviations

Line 03

Process air

Status

Classify consumption

Starting point

Consumption without readings remains an assumption

Cooling, lubrication or air flow is often checked only locally. Without central time series, gradual deviations, unnecessary consumption and unfavourable operating states are difficult to compare.

Solution

Every relevant line becomes visible

The SA5000 measures flow velocity and media temperature. AION LIO takes over the IO-Link data and sends it via LoRaWAN for evaluation – including spatially distributed lines.

Where effort can be reduced
01

Manual inspection

Readings from several lines become centrally comparable.

02

Separate temperature point

The example sensor supplies flow and media temperature together.

03

New data cables

The radio link replaces the additional data cable to the evaluation system.

Actual savings depend on the number of measurement lines, inspection effort, measuring interval and existing infrastructure.

ifm SA5000 Thermal flow sensor
ifm SA5000

Thermal flow sensor

01
Flow and media temperature
02
45 mm insertion depth
03
M18 × 1.5
04
For water, oil-based media and gases
05
Local display
06
IO-Link interface
View SA5000 at ifm

Applications in pipes

  • Cooling circuits
  • Lubrication and process media
  • Air and gas flow
  • Distributed supply lines

From measuring point to consumption balance

AION LIO translates the IO-Link process data using the IODD and sends it via LoRaWAN. Network servers and interfaces hand the data to dashboards, MES or customer applications.