Back to overview
Development outlook · Actuation

From measurement to switching command – actuation over LoRaWAN® Class C

AION LIO currently focuses on sensors and measurements. A variant with switching outputs is planned as a future development step: it is intended to carry simple control commands from the customer application over LoRaWAN® to an actuator.

01 · Control path

A clear path from the system to the switching output

The planned solution adds a return channel to the familiar data path. An authorised application creates a command that travels through the network server and LoRaWAN network to the Class C device, where it switches a defined output.

  1. 01

    Application

    The customer application creates an approved switching command.

  2. 02

    Network server

    The server validates and schedules the LoRaWAN downlink.

  3. 03

    Gateway

    An available gateway transmits the downlink over the radio network.

  4. 04

    Class C device

    The device is almost continuously ready to receive and accepts the command.

  5. 05

    Switching output

    The output applies the intended state to the connected actuator.

02 · Why Class C?

Downlinks without waiting for the next transmission interval

LoRaWAN Class C keeps the receive windows of a mains-powered end device open almost continuously. Commands can therefore be delivered promptly. This is faster than with battery-powered Class A devices, but it remains radio communication rather than hard real-time control.

Class C

For mains-powered devices with more frequent downlink communication

  • Prompt delivery

    Downlinks do not have to wait for the device's next uplink.

  • 24 V supply

    The higher receive demand fits a permanently powered industrial installation.

  • LoRaWAN security

    Authentication and encryption provided by LoRaWAN remain part of the data path.

  • Plan for feedback

    A confirmed device state is more meaningful than a command that was merely sent.

03 · Possible applications

For simple, non-time-critical control tasks

Enable a valve

Switch a simple inlet or outlet at a remote tank.

Request a pump

Trigger a pump request while local protection functions remain in place.

Switch a warning signal

Activate a beacon or sounder at a distributed site.

Set an operating mode

Change between clearly defined, locally safeguarded states.

04 · Product planning

Sensors and actuators in the same open radio architecture

The planned extension is intended to combine measurements and simple switching commands in one LoRaWAN infrastructure. AION LIO retains its bridging principle: open industrial signals on the field side, standardised radio and platform interfaces on the data side.

Discover AION LIO today