The sensor is rarely the problem – the path to the control cabinet is. Trenching, cable routes and terminals for remote tanks often cost more than the entire measuring point.
← Back to the application: Tank level monitoring
Level · Cable-free
Level monitoring without a cable route
Tanks, IBCs and silos often stand where no data cable reaches: outdoor storage, the yard, an annex building. These measuring points frequently go unrecorded – until a wireless adapter makes cabling unnecessary.
- Measurand
- Level in tanks, IBCs, silos
- Sensor
- IO-Link, e.g. ifm KQ1001
- Data path
- LoRaWAN® instead of a data cable
- Supply
- 24 V DC on site
At a glance
SensorKabelwegSchaltschrank
SensorAION LIOLoRaWAN®
AION LIO sits directly at the sensor and sends readings via LoRaWAN. Only the 24 V supply is routed – or whatever is already available on site is used.
Keep existing sensors
Existing IO-Link sensors stay in service. The adapter reads the process data digitally and translates it into meaningful values using the IODD.
How it works
- 01Mount the IO-Link level sensor on the tank and connect it to AION LIO.
- 02Configure the adapter via Bluetooth Low Energy and join the LoRaWAN network.
- 03Readings flow to the network server and from there into your application.
- 04View levels centrally – without anyone driving out to the tank.
LoRaWAN carries periodic readings over long distances. For levels that change over minutes or hours, that is exactly the right transmission principle.
ContactMore topics on this application