← Back to the application: Process pressure
Pressure · Overview

Pressure monitoring in process plants

Every process plant has pressure measuring points – but far from all of them are recorded. Where measurements are missing, leaks, blockages and wear stay invisible.

At a glance

Measurand
Process pressure in lines
Sensor
IO-Link, e.g. ifm PN7094
Typical points
Pumps, filters, line branches
Data path
LoRaWAN® to the network server
unerfasst?

The unrecorded spots

Pressure measurement is standard at central points. What usually goes unmeasured are the peripheral points: individual consumers, side branches, remote line sections.

What pressure reveals

Rising differential pressure at a filter suggests fouling, falling pressure in a branch suggests leakage or wear. Without measurement these signals stay invisible.

Retrofit without touching the controller

AION LIO reads the IO-Link sensor and transmits by radio. The measuring point is added without modifying the existing control system.

How it works

  1. 01Install the pressure sensor at the desired measuring point.
  2. 02Connect it to AION LIO via IO-Link and check the measuring range.
  3. 03Values flow periodically via LoRaWAN into your application.
  4. 04Deviations from the target range become visible and can be investigated.

For permissible pressure ranges, process connections and media, please refer to the data sheet of the sensor used.

Contact

More topics on this application